Shure GLXD14R+ Digital Wireless Rack System with WL93 Lavalier Microphone and GLXD4R+ Half-Rack Receiver

The must-have choice for performers looking to be wireless with elevated confidence and minimal hassle, the Shure GLXD14R+ Digital Wireless Rack System WL93 Lavalier Microphone and GLXD4R+ Half-Rack Receiver is the next essential to own.

Letting presenters focus on their performance, the GLX-D+ body pack automatically manages every aspect of its operation with heightened reliability. In addition to that, the brand new Dual Band Wireless Technology makes sure the GLX-D+ can operate in both 2.4 and 5.8GHz, which doubles the available bandwidth as well as avoids interference and dropouts in audio.

With a massive newly-improved 12 hours of runtime, the included lithium-ion battery can be charged in multiple ways which allow users to quickly charge their batteries with ease.

Coming with the WL93 lavalier Mic and the GLXD4R+ Dual Band Rack Receiver, effortlessly place your receiver into pre-existing racks without taking up too much space.

Key Features:

• Dual Band Wireless Technology - Ensuring reliable operation with minimal audio dropouts, the newly added Dual-band Wireless Technology operates in both 2.4GHz and 5.8GHz to avoid interference.
• Automatic Frequency Management - Continuously monitoring the spectrum and effortlessly moving to a clean channel, the Automatic Frequency Management easily avoids any potential interference.
• Smart Rechargeability - An improvement from its predecessor, the GLXD+ comes with a 12-hour runtime courtesy of its lithium-ion rechargeable battery. Showing the remaining time in hours and minutes, users can always ensure their body pack has enough power for their performance. Not only that but the SB904 lithium-ion battery can be charged directly or by the USB-C connector on the bodypack.

Shure GLX-D+ Dual-Band Bodypack Transmitter Specifications:

• Dimensions: 4.5 x 2.6 x 1.1 in. (115 x 66.94 x 28.51 mm), (H x W x D), without antenna
• Weight: 5.4 oz (153.1 g), without battery
• Power Requirements: 3.7 V Rechargeable Li-Ion
• Housing: Cast Metal, Black Powdercoat
• Input Impedance: 900 kO
• RF Output Power: 10 mW E.I.R.P. max

GLXD4R+ Reciever Specifications:

• Dimensions: 7.7 x 6.4 x 1.6 in. (196.8 x 162.97 x 41.8mm)
• Weight: 30.5 oz (866g) without batteries
• Housing: Steel
• Power Requirements: 14.5 V - 17 V, 600mA
• Spurious Rejection: >35 dB, typical
• Gain Adjustment Range: -18 to 42 dB in 1 dB steps
• Phantom Power Protection: Yes Audio Output:
• Configuration:
• XLR Output - Balanced
• 6.35 mm (1/4") output - Impedance balanced
• Impedance:
• XLR Output - 100 Ohms
• 6.35 mm (1/4") Output - 100 Ohms (50 Ohms Unbalanced)
• Full-Scale Output:
• XLR - LINE Setting = +18dBv, MIC setting= 12 dBV
• 6.35 mm (1/4") - +12 dBV
• Pin Assignments:
• XLR Output - 1=ground, 2=hot, 3=cold
• 6.35 mm (1/4") connector - Tip=audio, Ring=no audio, Sleeve=ground
• Mic/line Switch: 30 dB Pad
• Receiver Antenna Input:
• Impedance: 50 Ohms
• Antenna Type: Dual Band 1/2 WaveSleeve Dipole
• Maximum Input Level: -20 dBm

Shure WL93 Cardioid Condenser Lavalier Microphone Specifications:

• Type: Condenser (electret bias)
• Frequency response: 50 to 20,000 Hz
• Polar pattern: Omnidirectional, uniform with frequency
• Output impedance: 3000
• Output level (1 Pascal = 94dB SPL): Open Circuit Voltage: –38 dBV/Pa (13 mV)
• Output clipping level (at 1,000 Hz): 0.25 V at 120 dB
• THD: Less than 1% at 120 dB
• Maximum SPL: 120 dB
• Dynamic range (maximum SPL to A-weighted noise level): 102 dB
• Output noise (equivalent SPL): 18 dB typical, A-weighted
• Hum pickup (electromagnetic): N/A
• Signal-to-noise ratio: 76 dB at 94 dB SPL (IEC 651)
• Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)
• Recommended operating voltage: 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4)
• Current drain: 40 ?A typical
• Environmental conditions: Operating temperatures: –18o to 57o C (0o to 135o F), Storage temperatures: –29o to 74o C (–20o to 165o F)
• Cable: Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft])
• Weight: 16 g (0.57 oz)