Sequential Prophet Rev2 16-v Module

Don't be mistaken by it's scaled down size as it's just as mighty as the keyboard variation, the Sequential Prophet Rev2 16-V Module is a recreation of the sublime Prophet '08 poly synth, but with twice the polyphony, twice the mod matrix, waveshape modulation on all waveforms, and plenty more.

The outcome is a exceptional analogue workhorse, which showcases the same design in the interior as the original but with enhanced features to suit the modern producer.

Key Features:

16-Voice Polyphony: With 16 voices to delve into at the push of a button and allocate them as you desire, users can endlessly experiment with tones until they find the right sound for them.

Standout Classic Tones: Taking tones from the Prophet 08, the Prophet Rev2 gets its bold, punchy tone from its 2/4 pole, low-pass, resonant Curtis filters per voice. Familiar from the timeless synths from the 70s and 80s, the Prophet Rev2 offers a complex and sonically rich presence that's sure to elevate any project.

Waveshape Modulation: Another brilliant feature of the Rev2 is the waveshape modulation, which enables users with four waveforms to choose from (sawtooth, saw+tri, triangle, square). Users can use the Shape Mod control to dial in the desired waveshape width and much more.

Expressive Effects: Showcasing the standard effects such as Reverb, delays (standard and BBD), chorus, phase shifter, ring modulation, and distortion, users can use either stacked or split voice mode for unique sonic tones.

Sequential Prophet Rev2 16-V Module Specifications:

• 2 digitally controlled analogue oscillators (DCOs) per voice (plus sub octave on oscillator 1) with selectable sawtooth, triangle, saw/triangle mix, and pulse waves (with pulse-width modulation)
• Glide (portamento): separate rates per oscillator
• White noise generator
• Analog VCAs
• Hard sync

• 1 analogue Curtis low-pass filter per voice, selectable 2- and 4-pole operation (self-resonating in 4-pole mode)

• 3 envelope generators: filter, VCA, and assignable (four-stage ADSR + delay); Envelope 3 can loop.

SEQUENCER

• Polyphonic step sequencer with up to 64 steps (6 notes per step), and ties and rests. Separate 16 x 4 gated step sequencer. Each layer can have a separate sequence.
• LFOS
• 4 LFOs with key sync per LFO

MODULATION

• 8-slot modulation matrix
• 22 sources
• 53 destinations
• 5 additional dedicated sources: mod wheel, pressure, velocity, breath controller, footswitch

ARPEGGIATOR

• Programmable arpeggiator with up, down, up+down, random, assign modes
• Selectable note value: 16th note, 8th note triplet, 8th note, dotted 8th note, quarter note
• One, two, or three-octave range
• Re-latching arpeggiation
• Note repeat

CONTROLS

• 55 knobs and 35 buttons enable deep and comprehensive editing with little to no menu diving.

MEMORY

• 512 Factory Programs (4 banks of 128) and 512 fully editable User Programs with 2 layers (2 separate sounds) in each Program

IN/OUT

• MIDI In, Out, Thru
• Main stereo audio output: 1/4" unbalanced
• Output B stereo audio output: 1/4" unbalanced
• Sustain pedal input: accepts normally on or normally off momentary footswitch.
• Pedal/CV input: responds to expression pedals or control voltages ranging from 0 to 5 VDC (protected against higher or negative voltages).
• Headphone output: 1/4" stereo phone jack.

POWER

• IEC AC power inlet for internal power supply
• Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz
• Power consumption: 22 watts maximum (17 watts for 8-voice configuration; 22 watts for 16-voice configuration)

PHYSICAL SPECS

• Oiled African mahogany wood end panels
• Dimensions: 7.9" (20 cm) W x 21.6" (54.8 cm) L x 3.3" (8.4 cm) H
• Weight: 7.5 lbs. (3.4 kg)