sE Electronics sE7 Small-Diaphragm Condenser

Get recordings that are bursting with life every time with sE Electronic's slimline condenser mic!

Optimised Audio Performance

Get transparent audio clarity with the sE Electronics sE7 Small-Diaphragm Condenser, a small diaphragm condenser mic that can be utilised in an extensive array of instruments such as guitar, piano or drums. Regardless of how you use the sE7, you can be sure to achieve exceptional audio results.

Ideal for the producer, live sound engineer or musician looking for a natural yet crispy recording tone, this condensed sized microphone is a must-have to have in your arsenal!

sE Electronics sE7 Small-Diaphragm Condenser Features:

• Exceptional Quality Condenser Microphone with Back-Electret Condenser Capsule
• Short Signal Path Heightened Transparency
• Integrated Switchable Low Cut Filter
• All-Metal Housing with Gold-plated XLR Connector

State of the Art Design

Presented in an all-metal housing, the sE7 Small-Diaphragm Condenser is a mic that's ready to handle the demands of the studio and stage. That's not all though, as the metal exterior also delivers excelled rejection of any interference, so you're always guaranteed pristine audio quality!

Durable Functionality

Articulately crafted to achieve unrivalled natural and balanced sound quality, sE Electronics have fitted the sE7 with an elite capsule that has a sharp transient response. The cardioid polar pattern enables you to achieve impressive audio results no matter what your sound source is.

Versatile Performance

Showcasing a switchable pre-attenuation pad, this professional mic enables you to add -20dB to avoid potential overloading of your mixer or preamp. This innovative feature supplies the ability to achieve an extended dynamic range, bound to take your recordings to new heights. With an additional low-cut filter to supply 80Hz of filtering, eliminate unwanted low-rumbles easier than ever!

sE Electronics sE7 Small-Diaphragm Condenser Specifications:

• Capsule Type: 1/2“ back-electret condenser capsule
• Polar Pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: 19 mV/Pa (-34.5 dBV)
• Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
• Equivalent noise level: 16 dB(A)
• Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
• Signal to Noise Ratio: 78 dB
• Low-cut filter: 80 Hz, 6 dB/Oct, switchable
• Attenuation Pad: 20 dB, switchable
• Powering: 48 Volts according to IEC 61938
• Electrical Impedance: 1k Ohms
• Current consumption: 3.0 mA
• Connectivity: 3-pin male XLR connector
• Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
• Weight: 128g (4.52 oz.)