IK Multimedia iRig Stream Pro

Attention all professional podcasters, content creators, streamers and musicians, this is a piece of gear for you. The IK Multimedia iRig Stream Pro is the pinnacle portable streaming interface that offers up to four simultaneous inputs, impressive Loopback+ features and multichannel recording.

Showcasing a colossal 24-bit, 96kHz AD/DA conversion, the iRig Stream Pro delivers crystal clear sound quality, ensuring every finer nuance from your sound source. Even compatible with a vast selection of devices consisting of iPhone, iPad, Mac, Windows and Android, there are no limitations on where you can start creating.

Showcasing combined XLR and 1/4 inch jack inputs along with stereo RCA and TRRS inputs, the iRig Stream Pro caters to a vast range of instruments and equipment, resulting in the endless potential of where you could go with your project.

In addition, the optimised routing with Loopback+ and multichannel recording is perfect for the streaming musician due to being able to tweak your tone outside of the interface and then process it in your DAW or editing app.

Including a large selection of USB connectivity cables, the iRig Stream Pro is incredibly compatible with plenty of devices and most audio/video applications so you can confidently record ideas, conversations and performances when inspiration strikes.

Key Features:

• Combination XLR / 1/4inch input with +48V phantom power
• Stereo RCA Line input to connect your DJ equipment or keyboards
• Headphone out than can be used with headset microphone for an additional input
• Send your signal to mixers, cameras and more with the second headphone output
• High-quality 96kHz / 24-Bit resolution AD/DA conversion for clean and transparent signal
• Stereo and multichannel mode to process your tracks as one file or individually
• Individual input gain controls for each input source
• Route your device audio back through the iRig Stream Pro with Loopback mode
• Powered by 2 AA batteries, bus power or optional PSU
• Can power your device (with optional PSU)
• Works with all your favourite apps

IK Multimedia iRig Stream Pro Specifications:

• Type: 2 in/2out or 4 in/2out
• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Power: USB bus powered. 48V operations with iOS devices require a battery or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device
• Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input
• Device Connection: mini-DIN
• Dimensions: 123 mmx 67 mm x 40 mm
• Weight: 146g

Line Input

• Connector: 2x RCA (unbal.) Left/Right
• Nominal Input Level: -10 dBV
• Head Room: 10 dB - Level at max
• Input Impedance: 16.5k Ohms
• Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)
• Signal to Noise Ratio: 84 dB - Level at max

Microphone Input

• Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 3.8 mV RMS to 388 mV RMS
• Microphone Input Impedance: approx 2 kOhms
• Analog Gain Range: 40 dB
• Phantom Power: +48 V ± 4 V
• Frequency Response:
• from 20 Hz to 20 kHz (-1 dB) Gain at min
• from 20 Hz to 20 kHz (-3 dB) Gain at max
• Signal to Noise Ratio:
• 80 dB - Gain at min
• 70 dB - Gain at max

Instrument Input

• Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
• Instrument Input Level: from 70 mV RMS to 1.8 V RMS
• Instrument Input Impedance: 1m Ohms
• Analog Gain Range: 28 dB
• Phantom Power: +48 V ± 4 V
• Frequency Response:
• from 20 Hz to 20 kHz (-1 dB) Gain at min
• from 20 Hz to 20 kHz (-3 dB) Gain at max
• Signal to Noise Ratio:
• 80 dB - Gain at min
• 70 dB - Gain at max

Headset/Headphones

• Connector: 1/8” TRRS jack (CTIA wiring standard)
• Supply voltage: > 2,5 V
• Microphone gain: Adjustable with numbered thumbwheel
• Frequency Response: 20 Hz – 20 kHz
• Headphone Level control: numbered thumbwheel
• Battery Life: Phantom power On with iOS device: up to 20 hours (Alkaline batteries), with mic input connected to 3.1 mA phantom powered load
• What's included: iRig Stream Pro interface, Lightning to mini-DIN connection cable with charging features (60cm/23.62"), USB C-Type to mini-DIN connection cable (60cm/23.62"), USB A-Type to mini-DIN connection cable (60cm/23.62"), 2x 1.5V AA battery, Velcro strip

Compatibility:

• iOS Devices: iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone SE (2nd generation), iPhone SE, iPhone 11 Pro Max, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone 6, iPad (8th generation), iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air (3rd generation), iPad Air 2, iPad mini (5th generation), iPad (7th generation), iPad (6th generation), iPad (5th generation), iPod touch (7th generation), iPod touch (6th generation)
• Computers:
• Mac: macOS® 10.6 or later. One free USB port
• Windows: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed
• Android Devices: Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG mini-DIN cable (sold separately) may be required (depending on device model)